Mounted Hose Reels in Australia: Vehicle, Wall & Skid Options

Next-Gen FTB firefighting trailer sprayer deployed in field, ready for rural fire suppression operations

Mounted hose reels keep hose organised, off the ground and ready to go when you need water or foam fast. In Australia, they’re everywhere – on utes, in sheds, on factory walls and on skid-mounted fire fighting units. 

Choosing between vehicle-mounted, wall-mounted and skid-mounted setups isn’t just about price. It’s about how far you need to reach, how quickly you must deploy, and how tough the conditions are. 

Let’s break it down without fluff. 

What are mounted hose reels? 

Mounted hose reels are fixed reels bolted to a vehicle, wall, frame or skid so the hose is stored neatly and can be deployed quickly. Unlike loose hose, they: 

  • Reduce kinks, tangles and trip hazards 
  • Speed up deployment and pack-up 
  • Protect hose from UV and damage 
  • Make it easier to meet fire safety or workplace standards 

Fire and industrial suppliers in Australia typically classify hose reels by where they’re mounted – vehicle, wall or skid – because the mounting method changes the frame design, hose capacity and the way operators use them. 

 

Where mounted hose reels are used in Australia 

Common use cases include: 

  • Bushfire protection and rapid response – slip-on or skid units with tanks, pump and reel on the back of a ute or trailer for rural and semi-rural properties. 
  • Commercial buildings – wall-mounted fire hose reels installed to Australian standards for Class A fire risks in offices, warehouses and retail spaces. 
  • Agriculture and spraying – vehicle or skid units used for weed spraying, washdown and stock watering. 
  • Workshops and service vehicles – vehicle-mounted air, water or oil hose reels to keep work bays clear and improve productivity. 

 

Vehicle-mounted hose reels: pros, cons and best uses 

 

Vehicle-mounted hose reels: pros, cons and best uses

Vehicle-mounted hose reels bolt directly to utes, trucks or trailers. They’re common on fire appliances, slip-on units, spray rigs and service vehicles. 

Pros 

  • Maximum mobility – take the hose to the fire line, paddock or job site. 
  • Fast deployment – spring rewind or powered reels let one operator run out and rewind hose quickly. 
  • Compact footprint – can tuck behind cabs, on tray sides or at the rear of a skid. 
  • Good ergonomics – guide arms and swivels keep hose feeding smoothly even on uneven ground. 

Cons 

  • More vibration and shock – you need heavy-duty frames, dual-axle supports and robust mounts. 
  • Install complexity – may require custom brackets, reinforcing and careful routing of supply plumbing. 
  • Vehicle-specific – if you change vehicles, you may need to move or modify the mount. 

Best for 

  • Rural utes carrying slip-on fire units or spray rigs 
  • Council, mining and utilities vehicles 
  • Mobile washdown and pressure-cleaning setups 
  • Fire appliances that need rapid deployment and rewind 

 

Wall-mounted hose reels: pros, cons and best uses 

Wall-mounted fire hose reel installed on an industrial building wall, showing a fixed reel with hose and valve ready for emergency use.

 

Wall-mounted fire hose reels are the classic red reels you see in stairwells, car parks and factories. They usually carry 19 mm semi-rigid hose at 36–50 m lengths and must comply with relevant Australian standards in commercial buildings. 

Garden and light-duty wall-mounted hose reels are also common around homes and small workshops. 

Pros 

  • Always in the same place – ideal for fixed risks like building exits or wash bays. 
  • Simple to use – unroll, open the valve, and you have continuous water. 
  • Low maintenance – fewer moving parts than powered reels. 
  • Good compliance – fire-rated units are designed to meet building codes and standards. 

Cons 

  • Limited reach – you’re tied to hose length and building layout. 
  • Exposed to vandalism and impact if not protected by cabinets or guards. 
  • Not ideal for rough environments – dust, mud and impacts can shorten life in farm or quarry settings. 

Best for 

  • Commercial and industrial buildings needing compliant fire hose reels 
  • Washdown bays and loading docks 
  • Yards where a fixed watering point covers the whole area 

 

Skid-mounted hose reels: pros, cons and best uses 

Skid-mounted units combine a tank, fire fighting pump and one or more hose reels on a steel frame that can be lifted onto a ute, trailer or truck. Australian suppliers offer skid fire fighting units from about 400 L up to 17,000 L, typically with galvanised frames and 25 mm or 19 mm hose reels. 

Pros 

  • All-in-one package – tank, pump, suction hose, reel and nozzle in one system. 
  • Rapid deployment – drop the skid on a ute or truck right before fire season. 
  • Stable and robust – lower centre of gravity and engineered frames cope with rough paddocks and tracks. 
  • Easy to relocate – move between vehicles with forklifts or cranes. 

Cons 

  • Higher upfront cost – you’re buying a full fire fighting system, not just a reel. 
  • Weight and space – large tanks eat tray space and payload. 
  • Service complexity – pumps, engines and valves need regular checks, not just the hose. 

Best for 

  • Bushfire protection for farms, acreages and industrial sites 
  • Councils doing roadside burns or vegetation control 
  • Large properties needing multiple skid units staged around the site 

 

Key specs to compare before you buy 

Hose size, length and flow 

Match hose size and length to your pump and application: 

  • Diameter – 19 mm (¾”) is common for fire hose reels; 25 mm is used when you need higher flows, especially on skid units. 
  • Length – typical fire reels are 30–50 m; garden and washdown reels may be shorter. 
  • Flow and pressure – oversizing the hose without enough pump pressure gives a weak stream; undersizing risks friction loss and damage. 

Rewind type: manual, spring or powered 

Rewind type has a big impact on ease of use and operator fatigue: 

  • Manual rewind – simplest and cheapest. Best where hose lengths are moderate and usage is occasional. 
  • Spring rewind (auto-retractable) – uses a spring to pull hose back in. Good for work vehicles and busy workshops. 
  • Powered hose reel – electric or hydraulic drive, often with remote or self-guiding features. Ideal for long hose runs, steep ground and wildfire conditions. 

Materials, durability and corrosion resistance 

Look for: 

  • Galvanised or stainless frames in coastal or fertiliser-heavy environments. 
  • UV-stabilised poly tanks and hose on skid units used in full sun. 
  • Brass or stainless swivels and fittings where water quality is poor or mildly corrosive. 

Cheap light-duty garden hose reels are fine for lawn watering. They will not last on the back of a work ute bouncing around a paddock. 

Compliance, safety and standards 

For building fire protection, wall-mounted fire hose reels must: 

  • Meet the relevant Australian standards for construction and performance of fire hose reels. 
  • Be installed and maintained to the applicable fire and building codes in commercial settings. 

If you’re buying for a workplace, check: 

  • Pressure and burst ratings 
  • Temperature limits 
  • Whether the reel and hose are rated for firefighting or just irrigation or washdown 

 

How to choose the right mounted hose reels for your job 

Vehicle-mounted hose reel in use on a farm, showing a ute with a skid-mounted tank and hose reel spraying water across a rural paddock in Australia.

For bushfire protection and firefighting 

For bushfire work, reliability and reach matter most: 

  • Choose a skid mounted fire fighting unit with at least 400–1000 L capacity for small rural properties; larger farms often step up to 1500–2000 L+. 
  • Use a high-pressure fire fighting pump matched to hose size and nozzle. 
  • Pick spring rewind or powered hose reels so one operator can deploy and pack up quickly. 
  • If you move between properties, look at slip-on or skid systems that drop straight onto a ute, with fork pockets or lifting points built into the frame. 

For farms, spraying and washdown 

For spraying herbicides, fertilisers or washdown: 

  • Vehicle-mounted hose reels on utes or trailers give mobility down rows and tracks. 
  • Use chemical-resistant hose if you’re running anything other than water. 
  • Spring rewind reels save time when you’re moving between paddocks all day. 
  • If you need water storage too, a small skid unit with tank, pump and reel simplifies the setup. 

For workshops, service vehicles and depots 

In workshops and depots: 

  • Wall-mounted or overhead hose reels keep air, water or oil lines off the floor and out of the way. 
  • Multi-position guide arms let you mount reels on walls, benches or vehicle bodies and still feed the hose in the right direction. 
  • Choose rewind type based on usage: manual for low-use bays, spring or powered for busy lines. 

For service vehicles, focus on compact, heavy-duty reels rated for vibration, with dual-supported axles and strong bases. 

 

Installation and maintenance tips 

Mounted hose reels are only useful if they work under pressure – literally. 

Basic rules: 

  • Mount to structure, not cladding – fix into steel or timber framing, not just sheet metal or thin wall panels. 
  • Follow the manufacturer’s mounting pattern and torque specs – don’t improvise with random holes. 
  • Protect plumbing – use flexible connections or swing joints so vibration and movement don’t crack pipework. 
  • Service regularly – check hose for cracks and blisters, test valves and swivels for leaks, and lubricate moving parts as recommended. 
  • For fire installations, keep maintenance records in line with Australian standards and local regulations. 

 

Summary: matching hose reels to your risk and budget 

If you strip away the marketing, the choice is simple: 

  • Vehicle-mounted hose reels suit mobile operations – firefighting on the move, mobile washdown and service vehicles. 
  • Wall-mounted hose reels cover fixed risks – building fire protection, loading docks and static wash bays. 
  • Skid-mounted hose reels are for serious bushfire protection and large-scale rural or industrial sites where you want a self-contained fire fighting unit that can be staged or relocated. 

Start with your risk (fire, spraying, washdown), then your environment (building, farm, road), then pick the style of reel and mounting that keeps operators safe and the hose ready to roll. 

 

 

FAQs 

What’s the difference between a fire hose reel and a garden hose reel? 

Fire hose reels use semi-rigid hose, higher pressure ratings and must meet strict standards when installed in buildings. Garden hose reels are lighter duty, usually use softer hose and are not suitable for life-safety firefighting. 

How long should a mounted fire hose reel be? 

Common lengths in Australia are 36 m and 50 m for fixed fire hose reels using 19 mm hose. The length is chosen so occupants can reach likely fire locations from the reel location. 

When should I choose a skid-mounted unit instead of just a reel? 

Choose a skid-mounted fire fighting unit when you also need onboard water storage and a dedicated pump – for example on rural properties, construction sites or plantations. They’re built as complete systems, with tanks sized to your risk and vehicle. 

Are powered hose reels worth it? 

Powered hose reels are worth it if you’re handling long, heavy hoses or working on steep or rough terrain. They reduce operator fatigue and speed up pack-up on fire appliances, skid units and heavy service trucks. 

Do mounted hose reels need certification or inspection? 

Wall-mounted fire hose reels in commercial buildings must comply with Australian standards and be inspected and maintained on a regular schedule. Skid and vehicle-mounted hose reels used for fire fighting should still follow manufacturer maintenance schedules and any workplace safety requirements, even if they don’t fall under the same building codes.